Soap Making Kits
The Ghost With the Most CP Soap Kit
Product Details
Usage & Recommendations
Making our Ghost With the Most CP Soap:
Here's what's included in your kit:
- Sodium Hydroxide (Lye)
- Shea Butter Melt and Pour Soap Base
- Sunflower Oil High Oleic
- Mango Butter
- Cocoa Butter
- Coconut Oil- 76 degree
- Shea Butter
- Apricot Kernel Oil
- Castor Oil
- The Ghost With the Most Fragrance Oil
- Neon Green FUN Soap Colorant
- Black Oxide FUN Soap Colorant
- Titanium Dioxide
- Safety Goggles
- Safety Gloves
- Silicone Loaf Mold
Sold Separately:
- Thermometer
Other Ingredients & Equipment You'll Need: Distilled Water, Mixing Bowls, Mixing Spoons, Rubber Spatula, Scale, Stick Blender, Vinegar, Wooden Skewer, Thermometer, Soap Cutter, Safety Mask
Instructions:
Clean and sanitize your work area and all of your packaging materials. It is suggested that you wear gloves, protective clothing, a face mask, safety glasses, and a hair net while preparing this recipe.
This kit is not recommended for beginner soap makers. If you have not made soap before it is imperative that you become familiar with basic cold process soap making and soap making safety before attempting this recipe.
Note: If you have never made soap before, it is imperative that you become familiar with soap making safety and procedures before preparing this recipe. If you are not familiar with soap making safety and procedures, you should not use this kit. You will also want to wear a face mask, apron, gloves, goggles, long sleeves, long pants, and close toed shoes the entire time you are preparing this recipe. You will also need to prepare a bottle of vinegar and place it close by. Any equipment used for soap making should not be used for any other purpose.
86 grams Distilled Water
32 grams Sodium Hydroxide (Lye)
38 grams Sunflower Oil
68 grams Coconut Oil 76
16 grams Apricot Oil
9 grams Castor Oil
30 grams Shea Butter
32 grams Mango Butter
34 grams Palm Oil
17 grams Ghost with the Most Fragrance Oil
-
Start by preparing your lye solution using the amounts listed above. Weigh out your water slowly add your lye. Note: Always add the sodium hydroxide to your water. Never add your water to the sodium hydroxide. Repeat this process creating four batches of lye solution.
-
Weigh out your soaping oils as listed above. Melt your soaping oils. Repeat this process creating four batches.
-
In a very small mixing bowl, weigh out the titanium dioxide and add a small amount of soaping oils. Mix until clump free. You will only need one batch of this mixture. Set aside, for now.
-
Weigh out 17 grams of The Ghost with the Most Fragrance Oil. Repeat. You will also need 4 batches of the fragrance oil. Set aside, for now.
-
When both your lye solution and soap oils are around 130F and within 10 degrees of each other, combine one batch of lye solution with one batch of the soaping oils. Stick blend to emulsify.
-
Add about 10-15 drops of the Black Oxide FUN Soap Colorant. Mix it using a short burst with your stick blender then hand mix to fully blend.
-
Add the first batch of The Ghost with the Most Fragrance Oil. Stick blend.
-
Pour this layer into the loaf mold. Tap on your counter to release any air bubbles. Allow to set up a bit before moving to the next layer.
-
Prepare your second layer. Ensure both your lye solution and soap oils are within 10 degrees of each other, combine one batch of lye solution with one batch of the soaping oils. Stick blend to emulsify.
-
Add your titanium dioxide mixture. Mix it using a short burst with your stick blender then hand mix to fully blend.
-
Add one of the batches of The Ghost with the Most Fragrance Oil. Stick blend.
-
Pour your second layer. Tap on your counter to release any air bubbles. Allow to set up a bit before moving to the next layer.
-
Make sure that both your lye solution are within 10 degrees of each other, combine one batch of lye solution with one batch of the soaping oils. Stick blend to emulsify.
-
Add about 10-15 drops of the Black Oxide FUN Soap Colorant. Mix it using a short burst with your stick blender then hand mix to fully blend.
-
Add some of The Ghost with the Most Fragrance Oil. Stick blend.
-
Pour this layer into the loaf mold. Tap on your counter to release any air bubbles. Allow to set up a bit before moving on to the final piped green soap.
-
Make sure that both your lye solution are within 10 degrees of each other, combine one batch of lye solution with one batch of the soaping oils. Stick blend to emulsify.
-
Add about 10-15 drops of the Neon Green FUN Soap Colorant. Mix it using a short burst with your stick blender then hand mix to fully blend.
-
Add some of The Ghost with the Most Fragrance Oil. Stick blend.
-
Allow the soap to thicken to a frosting like consistency. Once thick enough, add it to your piping bag.
-
Pipe the soap onto the top of the loaf. Sprinkle with mica.
-
After 24-48 hours you can remove the soap from the mold. Once the soap is ready, slice your soap. Allow it to cure.
- Makes:
- 8 bars
- Time to Make:
- 3 Hours
- Difficulty:
- Advanced
- Instructions Included?
PRODUCT REVIEWS
What Everyone is Saying
Related Products
Products You Also Might Love